replacement of the fan

[shun]

Hi to all.
Which blower can be fitted to the Woody-16 instead of corrupted internal Rebeck97?
What of the variants below is better ether http://www.hedestoker.dk/content/Scotte-pillebr%C3%A6nder/Blaser3.jpg or http://www.hedestoker.dk/content/Scotte-pillebr%C3%A6nder/Blaser1.jpg?
Regards.

[michael f]

They can both be used.
The two-wire, no need capacitor.
If you change the type, you should be aware that they have different holes.

[shun]

Thank you Michael.

...
If you change the type, you should be aware that they have different holes.

ok. But where we can find original Rebeck97?

...
The two-wire, no need capacitor....

any other pros / cons?

[Skatemus]

Hejsa oversat til dansk

[shun]

Hejsa oversat til dansk

via google:
Hvad fan kan udskifte det fejlende bygget Rebeck97?

[michael f]

You can use this http://www.hedestoker.dk/3993_blaeser_til_scotte_120_kw.html
og this http://www.dvcenter.dk/varmesystemer/pillefyr-stokerfyr/pillefyr-scotte/scotte-woody-blaeserkit-10-30-kw.html

[shun]

You can use this http://www.hedestoker.dk/3993_blaeser_til_scotte_120_kw.html
og this http://www.dvcenter.dk/varmesystemer/pillefyr-stokerfyr/pillefyr-scotte/scotte-woody-blaeserkit-10-30-kw.html

thank you very much Michael.
But vast difference in the price! 3 times cheaper?

[N P K]

http://www.hedestoker.dk/3628_blaeser_til_scotte_10_20_kw.html

[shun]

http://www.hedestoker.dk/3628_blaeser_til_scotte_10_20_kw.html

but what about the problems described  by Michael above (mismatch of the mounting holes)?

[N P K]

http://www.hedestoker.dk/3991_bagplade_for_pillebraender_10_20_og_30_kw.html

[Martin Pedersen]

http://www.hedestoker.dk/3991_bagplade_for_pillebraender_10_20_og_30_kw.html

I'm quite sure that needs to be cut and welded into the burner.... so that's not a good option.

[Martin Pedersen]

thank you very much Michael.
But vast difference in the price! 3 times cheaper?

Yea, there's a reason why they changed to this new shaded pole fan... it is quite allot cheaper, but unfortunatly it's also a little smaller, so it doesn't mount on the older burners without some modification... but it is possible if you are a little handy.

[michael f]

I know NBE has developed an adapter plate so you do not have to change the entire rear section.
Ask di dealer about it.

[shun]

all clear. Well, almost  .
Thanks a lot, guys.