Interface > Interface til varme systemer

Pellmon opdatering

<< < (2/6) > >>

kivi:
Can i just copy the old pellmon.conf back and use that instead.

motoz:
Yes, absolutely. I try hard to keep backwards compability while simultaneously improving things for new installs so the old config should always work.

kivi:
I just tried to use the old config and then the front page is blank but i can get into parameters.

The log file shows this.

motoz:
You probably have to add this to your config (cut from the recent default config):

--- Kode: ---[frontpage_widgets]
# Select which widgets are displayed on the frontpage

#########################################
# Choose what is on the front page here #
#########################################
row_1 = systemimage,events
row_2 = graph
row_3 = consumption24h,silolevel
--- afslutning på kode ---

The contents of the frontpage is completely configurable now, this config snippet is from the default configuration and adds the stuff you probably had there. I actually don't quite remember now when I added the configurable frontpage, but your installation is probably older than that. So yes, without adding anything to [frontpage_widgets] your frontpage will be completely empty, sorry about that, it slipped my mind.

kivi:
Ahh of course.

But for now I have reinstalled the old version and everything is fine.

I will try the new one when I have some time to play again and will probably need your help again.

Thank You very much for your help and good night.

Navigering

[0] Emneindeks

[#] Næste side

[*] Forrige side