Stokerforum
Tips og Tricks => Ønsker til stoker kontrol => Emne startet af: shun efter Feb 22, 2017, 13:27
-
Hallo!
What does "Min. pellets dose" (Stokerkontrol---Auger) mean?
How it works?
-
Hallo!
What does "Min. pellets dose" (Stokerkontrol---Auger) mean?
How it works?
It is the smallest docis the auger can provide.
When the power increases, the amount too.
-
Thank you Michael!
What happens if I manually increase/decrease this value?
-
The auger adjust the "running time" for each dosing according the actual power %.
But you can run in the situation (depending on the amount the auger feed per 360 sec) where the shortest dosing is so short in time, that the auger really doesn't feed at all.
If you then increase the minimum dosing, you prevent this to happend.
However, it will also result in the auger to run with longer time-interval's when the actual needed dosing is below the minimum dosing you set.
Therefor the minimum dosing should be as low as possible, while the minimum dosing is still large enough to do a functional dosing.
Regards
Michael
Thank you Michael!
What happens if I manually increase/decrease this value?
-
The auger adjust the "running time" for each dosing according the actual power %.
But you can run in the situation (depending on the amount the auger feed per 360 sec) where the shortest dosing is so short in time, that the auger really doesn't feed at all.
If you then increase the minimum dosing, you prevent this to happend.
However, it will also result in the auger to run with longer time-interval's when the actual needed dosing is below the minimum dosing you set.
Therefor the minimum dosing should be as low as possible, while the minimum dosing is still large enough to do a functional dosing.
Regards
Michael
More or less clear.
Thank you very much Michael!